Frequently Asked Question

This Room is Equipped with Airtame

There are Multiple ways to connect to AirTame

Connecting to Airtame

1. Turn on the projector and select input 1
2. Connect your device to the ace_staff wifi network
   
3. Download and install the Airtame App (School laptops this app is already installed)
4. Open the app and select the room from the list of Airtame Devices.  Select "Share Screen" to start mirroring.

If the Room does not show up

1.  Look at the projector screen  Notice the IP address (10.21.84.101 in this case)  Or the Code "ABC12"

2.  Type the IP address or code into the seach bar in the Airtame App.  At this point you should see the desired unit and be able to select "Share Screen"

For Sound Issues

Be sure to select the speaker option in the airtame app.

Make sure you have "Airtame" Selected as your sound out.
1.  Go to the control panel in the top right hand corner of the screen

2. Select The sound output selector

3.  Make sure "Airtame" is selected as the sound out device